Different Types of Computer Repair Services

Our dependency towards technology is increasing day by day. Even a minor problem in the operating system disrupts our life and hampers our work. With the development of new technology, there also comes many technical problems such as virus infections, spyware attacks on the operating system, networks issues, and hardware failures. Therefore, fast and efficient troubleshooters are always needed to fix all your technical problems without disabling your work.

With the indispensable use of computers in our daily lives, we can not imagine encountering an issue that will leave us without our personal computers thus; We seek to have the computer service immediately. But due to the busyness of life, it is not possible for us to go to a computer service centers every time and get the system repaired leaving you days without a computer. Seeing today's need, there are many efficient and fast troubleshooters available online that will solve your problem in a fraction of time. Many of us do not understand need for professional computer repair services and try to solve the system related problem by themselves. Before going to any of the computer repair service sites, it is very important to be aware of the various types of services that are offered by the computer repair service centers:

1. IT services like network installation and configuration (LAN / WAN setup).

2. Virus & spyware removal. Installation of anti-virus software for a proactive approach to external attacks.

3. Hardware repair: Laptop / Mac / PC, printer, scanner, motherboard; CD / DVD ROM installation etc.

4. Problems related to Website development and presentation, graphic designing

5. Firewall and email security setup.

6. Windows OS installation and troubleshooting

7. Data backup and recovery

8. Tutorials to employees for solving small problems in-house

So, These are some of the services offered by the service providers. Before hiring any of the online computer repair services, it is very important to check the various types of services offered by them. So that you do not need to switch to different computer repair services sites for different services. It is also very important to check that there is a team of expert technicians for solving computer related problems individually, as this will help in solving the problem fast and efficiently. It is better to switch to such online computer repair services that you avail with the guarantee of fixing the problem fast else money back. As such, promises will pressurize the technicians to work efficiently and fix the problem quickly.

Posted in general | Comments Off on Different Types of Computer Repair Services

How to Repair “Runtime Error 481”

The runtime error is one of the most common Windows problems that keep popping up and keeping your system from running smoothly and perfectly, even a small or a single error in the process will leave your system in a knot. This makes it even more important for any user to know how to fix runtime error 481. In order to fix or diagnose the problem correctly everyone should first know what the actual purpose of the runtime processes. It is an integral and essential part of the Windows system details to manage the handling of many services as well as many different software as running on the Windows platform. Since, the file actually handles a lot of information and settings at a time it is very prone to attack by many different viruses, malware and even spyware.

The problems – there can be many different symptoms to the errors related to the runtime process. The symptoms can range from a simple delayed operation of the software to much more complicated system freezes and error messages. This sort of problems may arise from many different factors starting from corruption of the system file due to a virus infection or any other malicious software to defective and invalid system registry entries.

Though the problems are varied but still the answer to the question remains pretty simple.

The solutions – the solution to the runtime error 481 can be many forms, as the problem itself may arise from many different sources. Though it is widely accepted that the most common reason for such errors is a corrupted registry entries but still many tools and software is required to be used in order to properly remove the problem.

  • If the error actually results after installing a new software always make sure to uninstall and reinstall the software to check whether the error was caused by it.
  • Is the process file is corrupted beyond repair it is always safe to replace the file with an original one from any windows XP CD using the system file Checker tool. This can also be achieved from the recovery console is the system has completely crashed due to the error and cannot be started in a normal way.
  • As the most common problems that can give out runtime related errors is widely identified as defective registry entries, it is best recommended that you always check your system with a proper registry cleaner before taking any drastic step.

Even if all of the above methods fail, you always have the option of reinstalling your operating system in order to solve the runtime error 481. Though this may seem the simplest one but the safest and wisest one would be to use a registry cleaner regularly and keep your system clean and healthy.

Posted in general | Comments Off on How to Repair “Runtime Error 481”

Best Windows 7 Optimizer That Can Stabilize and Improve Your Computer Performance

A system optimizer is a software designed to maintain the performance of your computer, fix software related problems and keep your computer stable and secure. The need of a system optimizer software in Microsoft Windows7 operating system is high. This is because Windows 7 itself is unable to maintain all the mentioned aspects without the help of third-party products.

We are going to learn what exactly Windows 7 optimizer software is.

The best Windows 7 optimizer software shall include all the following features:

1. Registry Cleaner to fix the registry related issues

2. System Cleaner to clean unnecessary stuff and free-up the disk space

3. Registry Defragmenter to defrag the system registry

4. Startup Manager to control the programs running when you turn on your computer

5. Backup & Restore feature to restore unfavourable registry changes

“Registry Cleaner” to Fix the Registry Related Issues

Windows Registry is a vital component in Microsoft Windows 7. It contains information stored by your operating system and installed software. For example, the default settings, changes you made to your computer, system information, runtime data, etc. are stored.

Registry Cleaner is a software that finds the junk entries in the registry, and repairs them as far as possible. Unfortunately, Windows 7 does not include a built-in registry cleaner. The registry cleaner software included in the best Windows 7 optimizer lets you scan the genuine registry problems and correct them. It thereby helps avoiding many runtime errors and problems, such as, File Not Found, etc.

“System Cleaner” to Clean Unnecessary Stuff and Free-Up the Disk Space

A System Cleaner software lets you find the files and stuff that have unnecessarily occupied the hard disk space.

The tasks, like installing a program, uninstalling, repairing or updating the existing programs, and even just running the installed programs many times create temporary files, log files that need not be kept after the corresponding operation is performed. Sadly, many programs do not itself delete such files and stuff and thus your hard disk space is used for such unproductive stuff. Using a system cleaner software included in best Windows 7 optimizer, you can easily and safely delete such temporary stuff.

“Registry Defragmenter” to Defrag the System Registry

You know the importance of the registry in Windows 7 operating system, as already discussed. The continuous access of a number of programs to the registry results in its fragmentation. It reduces the system performance and freezes your computer.

The best Windows 7 optimizer software includes a registry defragmenter that enables analyzing the registry fragmentation and afterwards defrags it. A reboot is required to perform this process and all other running programs and services must be terminated.

“Startup Manager” to Control the Programs when you Turn on your Computer

Running too many programs at the Windows startup, results in system freezing and slow performance. A Startup Manager, included in best Windows 7 optimizer, lets you monitor and control the programs that run each time your computer is started. It lets you disable or delete the unwanted program entries and enable only those who are necessary.

Backup & Restore Feature to Restore the Unfavourable Registry

While doing all the above steps, care must be taken that you have followed some precautionary measures first, so that any unfavourable registry change can be later restored and unwilling situations can be easily avoided. The best Windows 7 optimizer should include such a feature.

Best Windows 7 Optimizer Recommended by Worldwide Experts

Posted in general | Comments Off on Best Windows 7 Optimizer That Can Stabilize and Improve Your Computer Performance

Advantages of Antispyware Programs

Much like the antivirus programs, now a days anti spyware programs also is a must if you are browsing the net. Most of the antivirus programs provide a good job by taking care of the computer viruses. However, many of them fail to detect the spyware which gets installed onto the PC when connected to the internet. This is where Anti spyware programs comes to help. They do a good job by protecting our computers by identifying the spyware and promptly remove them.

There are so many antispyware programs are available in the market. Both in the Online as well as near to your computer retail showroom. However, you have to ensure that you buy a good Anti spyware program which fulfills the requirements what it promises. Also, make sure to check that the software works on your Operating System. Most of them work on Windows Operating system; however, there is no harm in double checking the same.

Some of the characteristics of a good antispyware program is as below.

Real time scanning

Real time scanning is the heart of these type of programs. The program once installed should reside on your system tray and should be able to do a real time scan in the background. This way it should be able to identify all kinds of threats like Adware, spyware, Trojans and the harmful key loggers.

Automatic Updates

There is no point in having an Antispyware software program which does not update the spyware definitions automatically and at periodic intervals.

Customer Support

Most of the time you will not be require to call up their helpdesk as the software will work automatically provided if the operating system is compatible and all the installation prerequisites are met. However, if you run across any installation problems or some kind of bugs customer service comes in handy.

Posted in general | Comments Off on Advantages of Antispyware Programs

How to Watch Satellite TV Online Without Any Satellite Dish

Anyone can watch satellite TV online without any satellite dish system nowdays. In case you do not know, this article would show you one time-tested and another new revolutionary way to watch satellite TV on the internet without having to set up a satellite dish.

Many of the older generation grew up in an era of satellite dishes, especially for those who live in the rural areas where cable do not exist. The dishes are transmitters and together with receivers are conduits for TV signals to be displayed as visual images and pictures on our TV screens. However, they are not always pleasant. Set up can be tough and definitely not for those who are not good with their hands or have poor technical skills. Satellite dishes have grown smaller in recent years but they used to be larger than 6 foot monsters in earlier days. If that irks you, you would be relieved to know that you can watch satellite TV online just like many others without satellite dish system.

What are the hardware and PC requirements you need to set up your 'satellite-dish less' PC satellite online TV?

1. A Good PCTV Card

A PCTV card can be installed onto your computer to make your computer work like a satellite television set. Such cards come in the form of internal or external hardware. If you are familiar with the inside of a computer, then an internal card could be a good choice since they tend to be cheaper and more affordable. However, do not bother yourself when you find it too troublesome to fix it internally because there are external cards that work more like plug-and-play gadgets. They cost more and can set you back easily by a few hundreds. As long as your PC has a spare USB port, this option to watch satellite TV online is open to you.

2. PC Requirements

I would suggest you check your systems configuration before you start shopping for a PCTV card. Most cards require a minimum Pentium 3 333MHz system to run well but remember to note down the specifications like RAM, hard disk space, Operating System, etc before you head to the stores.

3. Ready Internet Connection

PCTV cards work well with both dial-up and broadband connections. However, I have a word of advice here. Dial-up transmission runs like a snail and is a really serious party spoiler. You can end up more frustrated than glad that you are watching the program. Go for broadband connection if you can afford to.

Okay, now that we have discussed about the older commonly accepted method to watch satellite TV online, we will look at another new revolutionary technique. This requires the usage of PC satellite TV software which can be downloaded easily. The setup is simple and all it takes is downloading the software and clicking a few buttons before you are ready to watch satellite TV online from more than 3000 channels. Awesome is not it?

For more information on this PC satellite TV software, do a read up at my satellite TV blog.

This article may be freely reprinted or distributed in its entity in any ezine, newsletter, blog or website. The author's name, bio and website links must remain intact and be included with every reproduction.

Posted in general | Comments Off on How to Watch Satellite TV Online Without Any Satellite Dish

Determining the Best Type of Fastener to Use For Outdoor Furniture Construction

If you want to learn about selecting hardware for your next outdoor furniture project, then you'll want to read this article. Specifically, I'll be telling you about what type of hardware will perform best, why the type of metal used for fasteners and the finish used are important considerations, and how properly protecting or limiting exposure of your furniture to wet and winter conditions can increase Life span. After you're done with this article you will understand that the best choice of hardware for your outdoor furniture project is dependent on furniture style, material used for construction, selected location for the furniture and budget.

Selecting proper hardware for your furniture will help ensure a long life span, as well as improve the overall appearance of your furniture. Part of the problem is knowing what hardware to select when there are so many options available at the hardware store. The typical Lowes or Home Depot carries a huge selection of stainless steel, hot dipped galvanized, bright galvanized, plain steel, coated steel and brass bolts, nuts, washers and screws. Each type of fastener is suitable for certain applications, but not all are ideal for outdoor furniture applications.

In fact, choosing the wrong fasteners can greatly shorten the lifespan of your furniture, contribute to rot of wood furniture, cause unsightly staining, and even make your furniture unsafe to use.

One thing that needs to be noted right up front is, do not ever use unprotected steel fasteners for outdoor furniture, they will rust very quickly, and the steel will react with the tannic acid in the wood causing streaks and staining. The tannic acid actually speeds up the corrosion of the fasteners. Have you ever seen a wooden fence with black streaks running down the boards from the nails? This fence was installed with the wrong type of fasteners. The same thing will happen to your furniture. Even worse, as the fasteners rust, they will speed up the decay process of the wood around the rusted fasteners, ruining your furniture and making it potentially unsafe to use.

Hot Dipped Galvanized

Screws and bolts treated by hot dipped galvanizing are specifically designed for use outdoors. Electroplated galvanized or bright galvanized fasteners will very well not hold up as well as the hot dipped galvanized hardware. Zinc is used as a coating in both methods, and acts as a barrier against the elements and the tannic acids in the wood.

I strongly recommend only using screws or bolts in the construction of outdoor furniture, however. The galvanized finish on nails, either electroplated or hot dipped, can easily become damaged while hammering them in, exposing the nail head to the elements and allowing them to begin rusting quickly.

Adequate care must be taken when installing galvanized screws. Drill pilot holes in hardwoods, and be sure to use a bit that is not worn and intolerable to skipping in the screw head. For whatever reason, the galvanized screws seem to not be as well tempered as other steel fasteners, and are more likely to either snap off or have the heads strip out while installing them. Due to the permission required for the hot dipped coating, galvanized bolts do not have as tight of tolerance on the threads, and are more likely to strip if over tightened.

Hot dipped galvanized fasteners are a fine choice for many outdoor furniture applications, including Adirondack Chairs, but are not the best choice for use in woods, such as teak.

Stainless steel

Stainless steel is the best choice for use in woods with higher levels of tannic acid, such as teak. Stainless steel is an alloy or blend of steel, nickel and chrome. The ratio of the other metals with the steel determine the weather and corrosion resistance of stainless steel. Because the steel is mixed with other softer metals, the stainless steel is not as strong, so predrilling of screw holes is highly recommended in all applications, and essential in hardwoods such as teak and mahogany. The added corrosion resistance more than outweighs any shortcomings that the metal may have, especially in outdoor furniture applications.

While stainless steel fasteners are the most rust resistant, they are also the most expensive of the options we are discussing. However, using stainless steel fasteners will add years of life to your furniture. In the respect, they are an investment that will pay out for years to come.

Brass

I have seen brass used in some commercially produced outdoor furniture, but do not recommend it. While brass does not form red rust, and is well suited for many wet applications such as toilets and sinks, it does tarnish and corrode. It is also very susceptible to the tannic acids in wood, which will cause it to fail more quickly. Brass screws in particular Do not have sufficient strength for outdoor furniture applications.

Outdoor or deck screws

In the past several years a number of manufacturers have introduced outdoor fastening products specifically marketed for deck building. These will typically be green, gray, tan or brown. These screws are either ceramic or plastic coated to delay the metal reacting with the wood acids. The specific coating methods are proprietary to each manufacturer, and can be a combination of electroplated galvanizing and plastic, or a baked on ceramic.

I have used these fasteners in furniture applications and they perform just fine. Unfortunately, I have not come across bolts with this type of finish. The brand of screw I used was Deck Mate, and they were available in tan and brown, so that the color can be selected to better match the wood being used. These screws are ceramic covered, and the manufacturer provided a coated bit for installation, which was designed to not damage the ceramic coating at the screw head. If you choose this type of fastener, be sure to compare the cost with stainless steel, as the price will vary. If the stainless steel is reasonably comparable in cost, it would be the recommended fastener.

Always be sure to read the manufacturers specifications on the box to be sure that the screws are suitable for your application.

Other Considerations

If you are building furniture that will be located on a covered porch or patio where it will be protected from the elements, the concern will be the interaction between the wood and the fasteners, much more so than the weather. Furniture that will be exposed to the elements all year, such as a garden bench, or an adirondack chair in the corner of your garden, will have to be constructed with much more care and concern to ensure that they hold up more than just one or Two winters.

Additional considerations must be made beyond just the choice of what type of fastener to use, though this is very important. For example, fasteners should not be located where water where collect and sit on the fasteners for an extended period of time. The screws that attach the seat slats to an Adirondack chair are a prime example- typically these screws will be countersunk below the surface of the wood. This will allow water to collect in the screw holes, shortening the life span of all but stainless steel fasteners, and prolonging the exposure of the wood to water, which will increase the rate of decay. In applications where the furniture will be exposed to the elements year round the screw heads should be driven flush with the surface of the surrounding wood.

Construction and design of the furniture are also important considerations. Are the horizontal surfaces of the furniture constructed in such a way that will allow them to shed water, rather than collect it? Think of a picnic table with a slatted or board top. The gaps between the boards allow water a way to run off the top and not pool up.

Conclusion

Stainless steel is usually the best choice for outdoor furniture applications, although the cost may be prohibitive for some. There are other less expensive fastener options available that will perform acceptably. Do not use unprotected steel fasteners for outdoor furniture applications under any circumstances. Know where and how you intend to use your furniture and design it for the conditions it will be subjected to.

Posted in general | Comments Off on Determining the Best Type of Fastener to Use For Outdoor Furniture Construction

How Useful is CAD Software to Engineers and Architects?

The emergence of advanced technology has made people today dependent on machines. Using computers and software, for example, is a very common illustration of this. Computer experts are coming up with more and more software to make more and more jobs easier.

A more specific illustration of this can be found in the modern approach towards engineering and architecture. These days, professionals in these fields use CAD computer software which is a program that allows them to create designs faster, easier and with more accurate measurements. Aside from the convenience that CAD software brings, it also helps put architects and engineers ahead of their competitors. CAD, which can render designs that are two-dimensional or three dimensional, stands for Computer Aided Design and has been in use since 1982.

So how does CAD computer software work? And what does it do exactly to help engineers and architects? The program is actually multifaceted in the sense that there are many ways it can help. To make CAD work will require, however, a careful study of its features and the many ways it can be used. It is rather a complex yet flexible and highly functional program.

This article will not be enough to discuss the various ways that CAD works but pinpointing its advantages could give some very good ideas. One great advantage of CAD computer software is its easy-to-use tools in the creation and alteration of designs. Obviously, this is so much better than the old fashioned way of using a pencil and eraser directly on paper. This method of designing is obviously so much easier and engineers and architects simply have more time to finish other tasks. In other words, high productivity is going to be the main end result of using CAD.

Before the design is actually printed on paper, CAD also allows both the design professional and the client to preview what has been finished so far. Any alterations can be made simply by manipulating the drawing through the use of the software. With CAD, it is so much easier to spot errors because the designs can be rendered exactly as they would be in reality. Hence, modifications can be done even before printing, thus, allowing one to save.

With the tough competition that everyone has to face these days, it is wise to take advantage of new technologies that can help put them ahead in the race. While traditional methods hold a significant part in the history of design, advanced tools such as CAD software should only be welcomed as man’s way of furthering development in a field of expertise that he himself has created long ago.

Posted in general | Comments Off on How Useful is CAD Software to Engineers and Architects?

Effective Job Numbering And Cost Code Systems

Overview

Many companies have a sequential job numbering system, but have you considered the possibility of altering the numbering sequence so you can pull reports for a certain type of project or projects by year and the informational reports that could be generated?

And, are your cost codes sufficient to cover the details you need to see in your reports? Do you lump all site related travel and subsistence into one code, or do you have the details of hotels vs. Housing and meals vs. Subsistence?

Not all software programs are sophisticated enough to allow for customized job type numbering sequences; However, even the basic job cost software systems can be adapted to allow for an advanced numbering system.

Specific Job Numbering Sequences

Advanced reporting techniques can yield a wealth of information. How jobs are numbered so ease the reporting burden so projects of a certain type and / or year can be easily excluded from the software. Samples of numbering sequences could be based on the following criteria:

· Year project was awarded

· Public vs. Private works

· Commercial vs. Residential

· Construction vs. Service

· Division (s) of the Company

If your software allows, you may start the job number with the year awarded, followed by the job type and then a sequential number. Management may request a report for gross revenue on all the commercial contractor improvement projects in 2013. If you have a numbering sequence, this would be an easy report to pull, rather than go through all your 2013 projects and manually add the numbers to obtain the Results.

The job cost master file is another good source of information if all fields are completed and there is a common usage of custom fields that can be used to pull reports.

Cost Codes – Too few or Too Many?

Often we see cost code lists that spill onto multiple pages. Most job cost software programs allow for use of one cost code for multiple categories (Labor, Materials, Direct Job Expense, etc.).

A good source to use for establishing a cost code list is the bid recap and detail sheets used when bidding projects. This will yield the different stages of labor, types of materials to install associated with that labor, the different types of equipment to be rented, categories of subcontractors and the details of direct job costs to be incurred.

These activities can be "numbered" to establish a list of cost codes. If the software allows for use of one code across multiple categories, give thought to not duplicating descriptions, but arranging codes together by "type" of work being performed, rented equipment, direct job expenses, work typically contracted out, etc.

Keeping your cost codes consistent will then allow even more sophisticated reporting – management can now ask for all commercial contractor improvement projects in 2013 and the total cost of crane rentals for the year on those specific projects.

Why Go Through These Steps?

History is a great source of information when anticipating the future. Cost details can be analyzed for specific types of jobs when preparing to bid a similar project. Historical information can be analyzed for margins on certain types of projects or a division of the company to make decisions on whether or not a certain type of work is profitable.

If fields are available in the job cost master file, reports can be declined not only by type and year but by project manager as well to look at performance and estimate vs. Actual results.

Conclusion

When developing any numbering system, consistency is important in order to maximize the reporting results. Management should determine the information they wish to see and develop job numbers and cost codes that will allow for advanced reporting not only to themselves but provide useful information to estimating, project managers and accounting as well.

Posted in general | Comments Off on Effective Job Numbering And Cost Code Systems

Examples Of Spyware And What They Are

Spyware is a general term used to describe software that performs certain behaviors such as advertising, collecting personal information, or changing the configuration of your computer, generally without appropriately obtaining your consent first.

Spyware is often associated with software that displays advertisements (called adware) or software that tracks personal or sensitive information.

That does not mean all software that provides ads or tracks your online activities is bad. For example, you might sign up for a free music service, but you “pay” for the service by agreeing to receive targeted ads. If you understand the terms and agree to them, you may have decided that it is a fair tradeoff. You might also agree to let the company track your online activities to determine which ads to show you.

Other kinds of Spyware make changes to your computer that can be annoying and can cause your computer slow down or crash.

These programs can change your Web browsers home page or search page, or add additional components to your browser you don’t need or want. These programs also make it very difficult for you to change your settings back to the way you originally had them.

The key in all cases is whether or not you (or someone who uses your computer) understand what the software will do and have agreed to install the software on your computer.

There are a number of ways Spyware or other unwanted software can get on your computer. A common trick is to covertly install the software during the installation of other software you want such as a music or video file sharing program.

Any software that covertly gathers user information through the user’s Internet connection without his or her knowledge, usually for advertising purposes. Spyware applications are typically bundled as a hidden component of freeware or shareware programs that can be downloaded from the Internet; however, it should be noted that the majority of shareware and freeware applications do not come with SpyWare. Once installed, the Spyware monitors user activity on the Internet and transmits that information in the background to someone else. Spyware can also gather information about e-mail addresses and even passwords and credit card numbers

Aside from the questions of ethics and privacy, SpyWare steals from the user by using the computer’s memory resources and also by eating bandwidth as it sends information back to the spy ware’s home base via the user’s Internet connection. Because SpyWare is using memory and system resources, the applications running in the background can lead to system crashes or general system instability.

Because SpyWare exists as independent executable programs, they have the ability to monitor keystrokes, scan files on the hard drive, snoop other applications, such as chat programs or word processors, install other SpyWare programs, read cookies, change the default home page on the Web browser, consistently relaying this information back to the SpyWare author who will either use it for advertising/marketing purposes or sell the information to another party.

Licensing agreements that accompany software downloads sometimes warn the user that a SpyWare program will be installed along with the requested software, but the licensing agreements may not always be read completely because the notice of a SpyWare installation is often couched in obtuse, hard-to-read legal disclaimers.

Examples of SpyWare

These common SpyWare programs illustrate the diversity of behaviors found in these attacks. Note that as with computer viruses, researchers give names to SpyWare programs which may not be used by their creators. Programs may be grouped into “families” based not on shared program code, but on common behaviors, or by “following the money” of apparent financial or business connections. For instance, a number of the SpyWare programs distributed by Claria are collectively known as “Gator”. Likewise, programs which are frequently installed together may be described as parts of the same SpyWare package, even if they function separately.

o CoolWebSearch, a group of programs, takes advantage of Internet Explorer vulnerabilities. The package directs traffic to advertisements on Web sites including coolwebsearch.com. It displays pop-up ads, rewrites search engine results, and alters the infected computer’s hosts file to direct DNS lookups to these sites.

o Internet Optimizer, also known as DyFuCa, redirects Internet Explorer error pages to advertising. When users follow a broken link or enter an erroneous URL, they see a page of advertisements. However, because password-protected Web sites (HTTP Basic authentication) use the same mechanism as HTTP errors, Internet Optimizer makes it impossible for the user to access password-protected sites.

o Zango (formerly 180 Solutions) transmits detailed information to advertisers about the Web sites which users visit. It also alters HTTP requests for affiliate advertisements linked from a Web site, so that the advertisements make unearned profit for the 180 Solutions Company. It opens pop-up ads that cover over the Web sites of competing companies.

o HuntBar, aka WinTools or Adware,WebSearch was installed by an ActiveX drive-by download at affiliate Web sites, or by advertisements displayed by other SpyWare programs-an example of how SpyWare can install more SpyWare. These programs add toolbars to IE, track aggregate browsing behavior, redirect affiliate references, and display advertisements.

oZlob Trojan or just Zlob, Downloads itself to your computer via ActiveX codec and reports information back to Control Server. Some information can be as your search history, the Websites you visited, and even Key Strokes.

Posted in general | Comments Off on Examples Of Spyware And What They Are

Advantages and Disadvantages of Biometric Time and Attendance Software

First of all let me ask you what you understand by time and attendance software? Have you ever been asked to log in as soon as you enter office and the main gate of the office has a Biometric machine that takes in your finger prints and allows you to enter the office premise? Yes, these are the time and attendance software being installed in a company.

Biometrics consists of methods for uniquely identifying a person (human being) by his/her physical or behavioral traits. There are many biometric software available in market for such purpose and their use is widely known. One such use is Biometric time and attendance management software.

Those days are gone when we had to punch in cards or sign into a register to tell the other person that we are present. Just as paper checking has been changed from manual to computerized, identifying a person and letting him in your office has been changed from manual to biometrics.

There are many benefits of having such methodology in your office. Such as:

• Accurate timing: When a person looks at his watch and enters the time there is a slight chance that he may see the wrong timing and write. Whereas with biometric time and attendance software there is no possibility of such mistake. The user does not need to see or check the time, it automatically gets logged in.

• Less error: There is no scope of human error here.

• Profit to company: If it’s accurate and correct the company will definitely gain from it.

As everything has a good and bad side this too has its disadvantages, such as:

• Extra cost to company: Biometric software and machine cost a lot more, so installing such software need a good investment money wise.

• Extra management: Remember when every employee is logging his own timing when he comes or leaves; there is no extra management here. But, if you are putting a machine there has to be taken some care of it.

Biometrics time and management software is really helpful when creating payrolls for employees. Once a definite timing has been registered you don’t need to think twice before creating the employees pay.

Many homes are also using such kind of software to have a safe and secure home. Biometric software is really helpful when you need security in your home as well as in office. There are many companies all over the world providing such biometric time and attendance software. You just need to keep an eye on the technologies and websites that are providing you these.

Posted in general | Comments Off on Advantages and Disadvantages of Biometric Time and Attendance Software